Tough composite, rigid front diff bulkhead block set to which all front suspension parts are mounted. Easy access to front differential makes maintenance super easy. 

Front lower suspension arm made from tough molded composite - hard rigidity. May be used on either left or right side.  

Front lower suspension arm made from tough molded composite - soft rigidity. May be used on either left or right side. Engraved with "S" for easy identification.  

The redesigned front lower suspension arms with all new special profile provide higher stiffness and rigidity to prevent bending of the arm under extreme racing conditions. The arms are moulded from a special composite mixture that provides sufficient flexibility to give easy-driving handling characteristics in all racing conditions.  

After extensive development and tests XRAY brings you new suspension holders providing you with new suspension geometry specially designed for flat and bumpy tracks. These new suspension holders were with a great success used at the recent European Championship where XRAY dominated and set TQ.  

Set of lower suspension pin holders made from tough composite material allows for geometry changing.
Includes the following:
• Front lower suspension holder (front)
• Front lower suspension holder (rear) – 4° and 5° kick-up
• Rear lower suspension holder (front) - 1° and 2° anti-squat
• Rear lower suspension holder (rear) - 2° and 3° toe-in 

Front lower suspension holder for FRONT of front bulkhead. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish with silver edging. 

Front lower suspension holder for FRONT of front bulkhead of XB8-TQ. Made from 7mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. XRAY stylish black finish with silver edging. 

Eccentric bushings for adjusting suspension settings. Set of 2. 

Front lower suspension holder for REAR of front bulkhead. Made from 5mm CNC-machined, highest-grade 7075 T6 aircraft aluminum. Xray stylish black finish with silver edging. 

Molded clips for adjusting position of front upper arm. Includes 1mm, 2mm, and 3mm thick clips. Set of 2. 

Front anti-roll bar, 2.2mm thick. 

Front anti-roll bar, 2.4mm thick. 

Front anti-roll bar, 2.6mm thick. 

Front anti-roll bar, 2.8mm thick. 

Front anti-roll bar, 3.0mm thick. 

Front anti-roll bar, 3.2mm thick. 

Ball joints for front and rear anti-roll bars. 5.8mm diameter. Set of 4. 

Pivot balls 5.8mm diameter. Set of 10. 

Ball joints for 5.8mm pivot balls. Set of 8. 

Lower inner pivot pins for front or rear. Hardened steel, 4mm thick. Set of 2. 

Lower inner pivot pins for front or rear with grooves on both ends for C-clips. Hardened steel, 4mm thick. Set of 2. Fits only the composite suspension holders #352309 Composite Lower Susp. Holders Set. 

Lower inner pivot pins only for #352301 Front or #353301 Rear Euros'05 TQ Suspension - Sets. Hardened steel, 4mm thick. Set of 2. 

M3x3 setscrew, hex drive. Set of 10 pieces. 

M3x5 setscrew, hex drive. Set of 10 pieces. 

M3x12 setscrew, hex drive. Set of 10 pieces. 

M4x8 setscrew, hex drive. Set of 10 pieces. 

M3x18 button-head machine screw, hex drive. Set of 10 pieces. 

M3x8 flat-head machine screw, hex drive. Set of 10 pieces.
 

M3.5x19 flat-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M3.5x22 flat-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

M3.5x45 flat-head screw, self-tapping, Phillips drive. Set of 10 pieces. 

3.2mm dia. E-clip. Set of 10 pieces.